QLD ZXR250 Water Pump Shaft

I found a clip on how to replace clutch and basket. My question, is it i just need to remove the circlip and the shaft can be take out from the left side?

 

Here is the image from megazip parts diagram. Remove the circlip from the shaft, remove the gear and washer behind it. Remove the water pump cover, water pump, and oil pump and it should all pull out the left side. You must remove the clutch cover and complete clutch/basket to access the circlip. I'd be curious to see a picture of the shaft after you remove it.

 

Thanks for the reply. Meaning i cannot just pull out the shaft. The gear has to be taken out prior to that.

 

And just got an update. No one in the world have stock for this item.

 

Looks like Megazip sell the shaft, 13107-1271 is the part number on this page:


https://www.megazip.net/zapchasti-d...zx250-c2-791494/oil-pump-oil-filter-13885135#