Separate names with a comma.
Thanks Flea, total expenditure including the $110 purchase price was around the $1,300 mark but that was only achieved with the help of Chris and...
Many thanks for the feed back, it was a challenge but with a little help from my friends we made it.
Readjusted the throttle and choke all working fine, many thanks Chris, however yesterday I noticed the rev counter wasn't working, it was working...
Thanks Chris, Gave both bowls a good soaking over night and put the choke on this morning and it started first time and kept running. Run for a...
Great Chris how do I free the ball baring
Starting cold I put the choke on full and it roars into life then stops, try again, nothing. I have cleaned the carbies and checked the cable all...
i don't see you as a bike wrecker more a bike restorer, you take bikes apart to restore other bikes, thats got to be good.
Thank you Chris for your help and encouragement it made the project so much easier
Bike all put together, just have to do a test ride to make sure ever thing works as it should, then RW and Rego [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Clutch problem resolved, I opened the clutch box and found where the noise was coming from and adjusted the components, now putting the bike back...
I tightened both ends of the clutch cable and there is some improvement, the noise only lasts for a few seconds then its ok. As the clutch lever...
Will do tomorrow thanks Chris
Is everything there? Looking at the drawings I would say yes. There is over 2mm on the free play maybe more like 10mm. The noise is coming from...
The noise is coming from both sides, come on guys someone should have an answer
I found a bearing in the arm that pushs the rod into the plates had fallen apart, put it back together and refilled with grease, put it all back...
I just listened to the clutch again and the noise is coming from the push rod side not the plates. I will take it apart again tomorrow and see...
I have fixed the wiring with another harness so all electrics are working, but the next problem is the clutch. with the motor running when I pull...
Starting to look like an Across, still have a long way to go but we are seeing progress, the bike sound great with the new exhausts still have a...
Found the exhaust pipes were nackered but was able to buy a decent set nearby, repainted the forks and front wheel and refited the front mudguard,...
The clutch is working, rode the bike up the hill at the back of us, all ok except for some clattering noise when I pull the clutch in. Will...