Separate names with a comma.
When is the inaugural 2fiftycc.com 2-stroke ride @kiffsta?
Hey guys. Apologies for the delay. I have a few projects on the go and the Grom was put on the back-burner a little bit. Mainly due to the issues...
Very cool project! Love seeing 2Ts brought back to life. Keep up the good work Kiffsta
I'm not sure what the figure quoted by Honda was back in the day, but a stock restricted one makes about 45whp... So i am pretty happy with the...
So after doing the wire splice delimiting (which was SUPER easy!), I got the old girl onto the dyno this weekend. [ATTACH] This was the result:...
Beautiful. Are you going to register it? If so, we should tee up a run over nebo with my NSR. Great work!
:D Thanks mate. I went back to the beginning of this post out of interest and it has been 5 years. haha. I haven't done the wire splice yet...
Well guys... After finally putting the rest of the bike back together, mixing up some fuel, bleeding the brakes, giving the chain a tighten and...
Good point. I'm not sure what the inner coating is but the plan is to get one fabbed out of ally.
Bit of a (delayed) update for those interested. After a lot of head scratching and experimenting, we found that it is WAY too rich with the stock...
After a bit of faffing around, I was able to get the R2J (1988) crank rebuilt in the 2J cases @KICKERMAN360 supplied, and rebuilt with my existing...
Nice to see you back into it @KICKERMAN360 I got one of those cranks from you rebuilt and the motor is all back together and in the bike now, so...
The cases are actually in great shape, and I am on a very limited time-frame so I hadn't planned on it, but I will likely rebuild the 89 engine at...
Well guys... I got the motor out and down to my mate Kazu for a crank rebuild, and no sooner had I got my hopes up about getting the old girl...
Have you still got the mc18 bits in brisse @KICKERMAN360 ?
Thanks Chris @kiffsta ! That is really good to know. Have you had much experience with going from an airbox to pods? My initial thoughts were...
Hi guys, So the little Grom is all back together and ready to roll, except I am having some issues with the motor. Basically, it starts and idles...
I am hoping to get it out this weekend for the first time @kiffsta Some of the other Grom lads have hired out the archerfield kart track for the...
One more thing ticked off the list...[ATTACH] Now waiting for a silicone intake bend to get the carb in the right place. Coolant lines have been...
Update time gents. The motor has made the transition from the jig frame into the road bike and is now in its final resting place. The front...