Separate names with a comma.
and here what it sounds like, rattle is exup [MEDIA]
got the head back off Gyro a few weeks ago, he shimmed it up on the bench and fitted it for me, THANX MATE!! I learnt heaps. I put the rest back...
yeah, i had a K1300R that i put 75,000km on, did all the servicing, and a K1300S did 30,000 on that, done heaps of oil changes, and yeah.... its a...
short story..... got hit by a car on the ZX12R... her fault, bikes a write off.. im ok, was fully insured, got money, bought another K1300S.....
I got an MC19 head in good nik, shimmed and ready to bolt on.... if it turns out thats what you need.
ouch... im ok, bikes fckt, [ATTACH] just sore.. she stopped, and then pulled out in front of me... bugger, i liked that bike...
this guy seems to have a set. are you in Australia?...
some great info building in this thread.... of which about 50% ish i completely understand. ... what i do reakon is...... when gyro eventually...
[ATTACH]
I have been told the Mitas small bike race tyres are some of the best, nice and sticky. Not sure if the 100 front and 130 rear are available,...
Im 6ft and 104kg... ish. Its definitely a sports bike position as far as the legs are concerned... so long as your knees bend ok you should be...
i will take the rear shock if its the one that works with the 3ln1.....
you forgot one of the coolest almost finished projects..... the blast furnace for casting manifolds... etc
Somebody here better get these... 2 x CBR400 and a MC22... $3000.... Be gone in about 1hr i reakon....
Went for a ride down Old Pacific Hwy yesterday morning, first ride through the twistys on the ZX12r... starting to get to to know the bike, luvin...
ha.. dash crying cant be heard over the Yoshi.... airbourne in a 50km street on a 230kg 1200cc.... nup... but... roll the throttle on off the...
i bought one... they are crap, would need trimming if you really wanted to try and make it fit, and the airflow is wrong anyway. I would not...
So the front brakes on my recently acquired 2005 ZX12R are well know for being crap, turns out they are the same crap calipers that were on my...
[ATTACH] replaced the rear brake pads and put a braided line on the ZX12R this morning, old brake fluid was pretty bad.