1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Project The FZR on Steroids Bike

Discussion in 'Other Projects - Other Bikes (non 250's)' started by GreyImport, Sep 21, 2019.

  1. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    Picked up some bits from a stolen/wrecked parts bike including the headlight assembly to replace mine that has a large burnt/melted lump on one side
    Pulled things apart while waiting for the postman

    front end.png


    The intake flapper , which has to go or disabled via the ECU (opens at 4500 rpm) as its only there to reduce induction noise ... yea right ... " loud p̶i̶p̶e̶s̶ induction howl saves lives "

    flapper.png



    Never cease to be amazed by the brilliant skills of POs :commando:

    fork space.png
     
    • Like Like x 2
    Last edited: Apr 8, 2020
  2. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    Discovered why the left fork was a few mm higher in the TTs
    When I went to loosen all the pinch bolts to lower it to match the right at 4mm (recommended) , they of course were already loose!
    Well certainly nowhere near the 20+ Nm torque they are supposed to be

    Hit some bumps and your fork leg moves up the triple trees :crazypilot:

    Some people should never progress past their pump up scooter

    :headbang:
     
    • Agree Agree x 5
  3. ruckusman

    ruckusman White Mans Magic Master Premium Member Dirty Wheel Club

    Messages:
    3,225
    Likes Received:
    1,416
    Trophy Points:
    918
    Joined:
    Oct 1, 2013
    Gender:
    Male
    Location:
    Narrabeen, NSW Australia
    My Bike:
    Yamaha FZR250 3LN1
    PFFT, insignificant details
     
  4. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
  5. Andych

    Andych Moderator Staff Member Premium Member Contributing Member Dirty Wheel Club

    Messages:
    4,289
    Likes Received:
    2,504
    Trophy Points:
    918
    Joined:
    Oct 6, 2016
    Gender:
    Male
    Location:
    Albury 2641
    My Bike:
    1987 Yamaha SRX250, Honda 1974 SL125 K1, 2022 Triumph Tiger Sport 660
    Maybe some 3mm alloy the same size as the new plate ( as long as it has holes in it ) and then some countersunk screws to mount it up to the existing tail tidy?


    Sent from my iPhone using Tapatalk Pro
     
    • Agree Agree x 2
  6. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    Yep my thoughts too but something nicely manufactured and readily available at 1 or 2 clicks of my mouse is preferred to a home made hack job :D
     
  7. ruckusman

    ruckusman White Mans Magic Master Premium Member Dirty Wheel Club

    Messages:
    3,225
    Likes Received:
    1,416
    Trophy Points:
    918
    Joined:
    Oct 1, 2013
    Gender:
    Male
    Location:
    Narrabeen, NSW Australia
    My Bike:
    Yamaha FZR250 3LN1
    Velcro for quick removal when in the proximity of cameras, if you catch my drift
     
    • Agree Agree x 1
  8. my67xr

    my67xr Bike Enthusiast Staff Member Premium Member Contributing Member

    Messages:
    4,313
    Likes Received:
    2,383
    Trophy Points:
    898
    Joined:
    Jun 18, 2016
    Gender:
    Male
    Occupation:
    Panel Beater, Spray Painter, Custom Fabricator
    Location:
    Adelaide, South Australia
    My Bike:
    Yamaha's , 1990 FZR250R 3LN3 , 1986 XT250TS 57R , 1984 IT200L 43G, 1976 IT400C 510
    • Like Like x 1
  9. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    Bling me up Scotty

    plate a.png

    Blue is nothing like the bike blue but looks pretty slick ... still working on a mounting plate

    plate b.png
     
    • Like Like x 4
  10. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    • Funny Funny x 1
  11. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    Similar setup ... looks like someone has dispensed with the most important part, on mine

    plate holder.jpg
     
  12. Andych

    Andych Moderator Staff Member Premium Member Contributing Member Dirty Wheel Club

    Messages:
    4,289
    Likes Received:
    2,504
    Trophy Points:
    918
    Joined:
    Oct 6, 2016
    Gender:
    Male
    Location:
    Albury 2641
    My Bike:
    1987 Yamaha SRX250, Honda 1974 SL125 K1, 2022 Triumph Tiger Sport 660
    Tail Tidy by deleting the good looking part designed by the manufacturer... Brilliant move by PO :thumb_ups:
     
    • Agree Agree x 1
  13. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    The world needs more bling

    Cap - Copy.png
     
  14. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    Out with the gay K&N filter and in with the go fast red BMC

    BMC (Medium).png

    Old hex key tool holding thingy ... grind, drill, paint and finish with the number plate shuffle ... total cost $0.00

    plate 1 (Medium).png plate 2 (Medium).png plate 3 (Medium).png
     
    • Nice Work Nice Work x 2
    • Like Like x 1
    • Winner Winner x 1
  15. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    All back together and out onto the 'test track' for a nice sunny day blat

    Running much smoother and crisper with the new filter
    Also been playing with the suspension (thanx to watching 101 videos from @Dave Moss Tuning ) and it felt better even with my beginner skills , but a long way to go


    daytona may (Medium).png daytona may 2 (Medium).png
     
    • Winner Winner x 1
    Last edited: May 4, 2020
  16. Andych

    Andych Moderator Staff Member Premium Member Contributing Member Dirty Wheel Club

    Messages:
    4,289
    Likes Received:
    2,504
    Trophy Points:
    918
    Joined:
    Oct 6, 2016
    Gender:
    Male
    Location:
    Albury 2641
    My Bike:
    1987 Yamaha SRX250, Honda 1974 SL125 K1, 2022 Triumph Tiger Sport 660
    So you have been out "exercising"... apparently it is good for you :)
    That plate looks the Ducks Nuts too.
     
    • Agree Agree x 1
  17. Grasshopper

    Grasshopper Well-Known Member Dirty Wheel Club

    Messages:
    1,060
    Likes Received:
    514
    Trophy Points:
    543
    Joined:
    Feb 19, 2014
    Gender:
    Male
    Location:
    Tamworth NSW
    My Bike:
    Yamaha FZR 250 3LN3, Triumph Sprint ST 955i
    Sexy maaan...
     
  18. Linkin

    Linkin The Mechanic Premium Member Contributing Member Dirty Wheel Club

    Messages:
    4,730
    Likes Received:
    2,870
    Trophy Points:
    943
    Joined:
    Mar 18, 2014
    Location:
    Sydney NSW
    My Bike:
    FZR250R 3LN6
    Council workers could do with some instruction on how to seal the edges of a road properly :thumb_ups:
     
    • Funny Funny x 2
  19. Andych

    Andych Moderator Staff Member Premium Member Contributing Member Dirty Wheel Club

    Messages:
    4,289
    Likes Received:
    2,504
    Trophy Points:
    918
    Joined:
    Oct 6, 2016
    Gender:
    Male
    Location:
    Albury 2641
    My Bike:
    1987 Yamaha SRX250, Honda 1974 SL125 K1, 2022 Triumph Tiger Sport 660
    Which time, seems to be multiple layers not properly sealed.


    Sent from my iPhone using Tapatalk Pro
     
  20. GreyImport

    GreyImport Administrator Staff Member The Chief Contributing Member

    Messages:
    10,914
    Likes Received:
    6,709
    Trophy Points:
    1,168
    Joined:
    Jun 14, 2012
    Gender:
    Male
    Occupation:
    Between a Rock and a Hard Place
    Location:
    North by NW NSW Oztralia - Tamworth
    My Bike:
    *Kawasaki ZXR250C *Yamaha FZR250R 3LN1 *Yamaha FZR400 *Triumph Bonneville 750 T140V *Triumph Daytona 675 *Triumph Tiger 800XC
    That section of the road actually has an A1 surface and a nice sweeper and a good spot to open the taps while out 'testing' ;)

    Maybe they should use that method more often

    sweeper (Medium).png sweeper 2 (Medium).png
     
    • Like Like x 1

Share This Page