I have a FZR250 engine that is apart. Unfortunately due to an accident while in storage in my car boot, the deck was bumping on the edge of an amplifier it was sitting on. Everytime the car went over a bump... As a result the head deck has gouges and scratches. It will need to be resurfaced - but I simply dont have the will anymore - I already have another fzr250 engine I will use (also in parts atm). Also in haste to move on another project. One of the cams has pitting from rust too - see pic. Have the old head/cylinder gaskets to come with this engine - they are cleaned - will need a copper spray coat when used again. It follows that I also want to get rid of the bottom end - again for free. Pistons are removed. I have not taken apart the bottom end of this particular engine. It probably needs to be inspected and I was planning to until this happened. I have a set of new standard size AHL pistons to give away - I will only give them away if you take the whole package away from me. Anyone interested let me know. If I dont get this off me it will just end up in landfill.