Separate names with a comma.
didn’t fit the rings to the engine, i don’t have to, nothing’s wrong with my engine, it was that cheap compression tester that was waaaay...
this concludes that my initial pressure tester is ****.... and i actually did a pressure test one more time and felt the hose to the manometer...
ok a bunch of good news ! 1) the rings came and they fit!!!!! 2) i did a leakdown test , despite that my tested was a bit leaky before connecting...
I've still got 3 pistons and the cilinder from my previous engine, i'll try them on one of those first.
these ones came without the pin indentation, i now about that on 2 strokes
I asked around on ebay for people to measure the thicknesses and i got one life changing reply. I finally found out that the Honda CB125T does the...
i've just found out the part number but no success in finding the actual rings pn: 12140-34831
the thing with these rings is they are thicker than the other ones i found, not sure what thickness are the honda cb/ca125 i messaged several...
yeah that's me:D
hi ruckusman! here it is, straight from the service manual, tanks for getting involved! @Murdo don’t want to modify the pistons really ... my...
the thing i can't find with that 139qmb engine is the thicknesses of the piston rings. I'll just order a set and see if they fit on one of my lose...
thanks Murdo! here are the dimensions of the rings from the service manual
please do it again! i’m desperate here
that’s pretty much my whole lockdown with some days of going to work but I was on it for the past 2 months. I’ve soo enjoyed it, and learned so...
but please please pretty please, if someone knows a place that makes custom piston rings, or another engine using the same sizes please let me...
that’s how the bike was when i decided to bring it over and fix it: and the last image is how it’s going to look finally once i build the body...
Cheers guys! as for the pandemic situation , for me this was it, i pretty much locked myself in the garage and fixed it.
I was hoping someone would sugest that. here they are from the service manual: the first photo is me measuring the rings out of the piston...
Hi guys! My name is Chip, I'm from Birmingham UK. I've inherited this beauty from my late father and decided to restore it . I filmed everything...
[ATTACH] [ATTACH]
