Separate names with a comma.
I believe it's vvt. It's a gsf250vy g77a 1999 model. Yeah the connections are not looking the best where the coolant pipes are. I guess I'll have...
Hey there been awhile since I've posted about this bike, but been feeling motivation to get back on the grind to get it to finally start and run...
Turned the mixture screws to a 1.0 setting and it ran for a bit and died from bogging out by what I was hearing.
I confirmed the main jet was the same as the old one because it had the size written on the side of both 97.5 and the pilot jets had their model...
Sweet as. Will give the spray bottle a go next time. Yup will idle til about 2000rpm no problems no choke needed when warm. At the current...
I pulled the hose off the vacuum line and put a bung on it, funnily enough that's what got it started and running like the video in the end....
No petcock attached atm, ive got a sauce bottle running through a fuel filter straight onto the carb.... in saying that maybe i need to drill a...
OK heres a new video for you guys. Started with a squirt of starter fluid, no throttle and choke on from cold. Running with choke on. I hit the...
Should be ok, I'll mapgas them and if that doesn't work I'll sandblast the tips.
Replaced the spark plugs today and she ran for about 2min with terrible throttle response, then bogged out and died with carbon build up on the...
Yeah I'm pretty sure I've got the connections right as I haven't messed with the electrics at all. I've also had it running idling at high revs on...
This is all new stuff to me. Really need a mate to help me out Compression I did was cyl 1 : 120psi cyl 2: 120psi cyl 3: 115psi cyl 4: 125psi...
yeah I put starter fluid through it after you replied and got a massive backfire out of it, but no start.
Long time no post. So I've done the compression test its all within 5psi between cylinders. I've cleaned and rebuilt the carby with the kit I...
Yeah my first thought was at least I'm getting the same numbers across everything. Taking the head off to do valves and rings seems to be its own...
Hey for those guys asking finally did a compression test. Cyl 1: 75 psi Cyl 2: 75 psi Cyl 3: 70 psi Cyl 4: 80psi. Also this probably isn't so...
Ok I'm taking advice. First bike I've seriously worked on so I'm learning. Originally I read through a member Linkin project bike post on this...
So a quick one, I'm sure there is a simple stupid answer. The short question: How do you guys get around draining your battery when trying to get...
The last owner says to me its been abused when he owned it and til it stopped. He was a 17 year old rich kid with a golf gti and a mazda miata....
Hey everyone. Brought a Suzuki GSF250V GJ77A. It wasnt running when I brought it. Since then I've got it in pieces and it's turned into a bit of...
