Separate names with a comma.
finally got the bulbs, put them in the bike, made the mistake of cutting the tabs on the first bulb but it's not the end of the world. went and...
disregard previous message. the new temp/thermo sensor (and making sure the wiring was correct) ended up working, the temp gauge now moves.
decided to get a new temp sensor anyway cuz at least i might end up with a spare, turns out yes both of them work. no the temp gauge is still...
haven't got them in yet, had to order some online. i'll be sure to let you know how they go once they get here.
awesome, i'll give 'em a shot then. thanks for the help!
i'll see what i can grab. no switchgear or wiring issues with these kinds of bulbs?
any light bulbs that you would recommend in that case?
I've heard a few things about higher wattage bulbs burning out the switchgear and draining the electricals. so any recommendations for a H4 bulb...
finally getting down to the nuts and bolts of this project and i need a set of headlight bulbs. my Honda dealer don't sell any, and the ones i can...
thanks for the response, i'm sorry if the original message was a bit confusing, as far as i'm aware the gauges for the 22s and the 19s should be...
been slowly making progress on my project bike over the last couple months and I've encountered issues with my temp gauge. initially i thought...
i'll try to get the other 2 carbs drained and see if i can get my hands on new plugs, the ones in the bike did all seem to be sparking strongly....
no, we didn't drain the carbs before attempting to start it originally.
it's a 3LN3 and the fuel flow seems about right, though the fuel drained from the float bowls we could drain was kinda yellow
thanks. the manifold boots were tightened properly as far as i could tell, i will check the carbs out when i can.
sadly the last person to touch the carbs ruined the drain screws by over tightening them on 2 and 3 which does not fill me with joy, already made...
no, i don't have any good idea what the clearances are like. that might end up on the list of things to check. anything else that could've gone...
any idea if these bikes will crank over without a fuel pump? or is there a relay or something of the like that will prevent that?
okay, i'll check the thread out and see if the leads are correctly routed.
I'm currently working on a 1990 FZR250 that won't start. It sounds like it's really close to starting but it just refuses to start. Fuel is...