Separate names with a comma.
I purchased a second hand Ninja 250 Chain Guard and chopped it
I found replacements at a bike bolts shop on ebay. They were aluminium, however a lot of mechanics I spoke to said even for engine cover bolts not...
Hey Mate, I had the welder cut some plate steel 6-7mm and weld it on in the shape for my rear sets. Mine had to be mounted wit ha screw i nthe...
After market by RnG racing UK. Got it from moto heaven. Basically have to remove the rear cowls, unscrew the tail from the frame and move all...
[ATTACH]
Thanks guys!
Hello All, I just watched a video compilation on youtube of filthy pricks stealing bikes all over the world. Whilst a lot of them could have been...
First fix on the new Ninja. Fuel gauge on the 2012 EX250J was buggered, only showing half. Pulled the tank off and cleaned the pickup with a...
Hi Guys, I'm selling this Carac single motorcycle trailer, it is non-braked. It has a gross capacity of 750kg's and a load capacity of 375kgs....
Hi Again Team, After recently selling my GSX250 Cafe Project, I won an auction at a website for a 2012 Ninja 250R Special Edition in reasonable...
This project is for sale if anyone is interested. I've run out of time and money and some other more pressing things have taken priority....
Bike is running perfectly. Happy days!
Turns out that moving the Main jet up 1 size to 125 from 120 fixed the flat spot, sacrificed top end power but made the mid more rideable....
Hi Guys, due for an update. After messing around with that engine for so long now, I took the rocker cover off again and the timing wasn't...
Yes, I am a member at the place that did my roadworthy rego but I'm not sure if the guys there share my interests. And the MCR group dont have a...
So I recently got out on the road. Knocked out 150 km's even with the slight flat spot. Bike ran well and true on the road. Recently, I took the...
Thanks mate this will really help!
So my carburettor boots disintegrated the other day. I've jsut replaced them and the bike seems to be bogging down around 5000-7000 RPM. I clipped...
It runs, he sent me a video it's not exactly smooth. Probably needs a clean and balance. I should do a compression test before I purchase. [MEDIA]
Hey guys I have the opportunity to pick one up for $500 with 88,000 and a bent right mirror, indicator and foot peg. Thinking it might be a bit...