Separate names with a comma.
the difference may be valve clearance mate. my mechanical skills are probs 5/10 and I found re-shimming the valves pretty easy. I would recommend...
Okay, I have the following settings on my working FZR250 3LN-3 Fuel level: 10.5MM ABOVE the midle line, not the mukuni line, the line it says in...
My bike seems to be running okay, I will get the fuel level that I am using tomorrow for you fellas as well as pilot jet size main jet size and...
let us know when you find them at a good price, where/how much would be good information to keep on the forum
Check spark plug wire order, kind of sounds like 2 and 3 might be mixed too
when you start the bike sit on it, I find mine starts better when the bike is level, might be flooding the 4th carb or something.. idk, also check...
Hi there mate, I had the exact issue you are having a while ago and this is how I got my bike going. My issue with the bike not revving once warm...
I'm a chippy too, I was actually in merimbula in march for a holiday, nicest place. Thanks for the information, I'll try that for sure, anything...
Hey guys, I need a valve gasket for my 3ln3 and am wondering if the gasket from another model will fit.<!-- m --><a class="postlink"...
Problem: smell of fuel at lights. Low performance at 1/4 throttle to half throttle. Reference: <!-- m --><a class="postlink"...
Thanks again for that information, I think i will rip my carbs apart and start from scratch making sure every single part is nice and clean and...
Thanks very much for the replies, all very informative. I will start off by saying I have a 250 3LN3.. My jets are stock, so I shouldn't have a...
are you talking about this oring? <!-- m --><a class="postlink"...
Hey guys.. my bike runs okay as it is but my fuel economy is pretty poor. I also notice a fuel smell at the lights. I have thought about buying a...
Re: 3LN1 dyno and tune-up results good work mate, good to see the amount of horsepower you got out of it! you should ask your mechanic for the...
Hey guys, just a quick update.. bike is working ace still, all those settings work very well. Just a tip if your still having any issues.. I took...
Perhaps check your valve settings, might be getting a little too tight when the engine gets warm. Post in "Got a problem" next time to get a...
Hey guys, My FZR is now running perfectly. so I am ready to share my settings so hopefully some of you can sort issues out. These are settings for...
Hey grey, I just read your post <!-- m --><a class="postlink"...
Thanks heaps for the quick reply mate, Exup seems to be working sweet, might try wiring the sucker open as a last attempt! *edit intake is all...