Separate names with a comma.
I'm still a bit lost, did the bearings you bought have codes on them?
So how did you end up working out the main bearings and if the ones you ordered were right?
Man, I could go a Zooper Dooper.
Yeah, that's the one, what ^^that guy said :D
Yeah, from an R6S. (06+ may be wrong) It's almost is a straight swap. You need to space out the top bolt with washers and make some shorter dog...
They look good mate. Do you have a link to the ones you went for?
I've bought stuff off there too. Standard system of you get what you pay for. Cheap prices with the quality you would expect.
Friend of mine bought pistons from aliexpress for his MC22. they weighed exactly the same as the factory ones. Had his first race with them...
I'm now watching this with great interest. What you're doing now is almost exactly what I need to be doing.
Does anyone know if the sump from a 3LN1 will fit on a 2KR?
Speculation at this stage, but I'd bet my house on a big end bearing, I've heard that rattle before.
So this engine that I picked up was a bit of a weird one, it seems to have a 2KR bottom end and a 3LN head. I didn't realise that they were...
Hey all, So I had a very interesting weekend at the Baskerville Historics on the weekend...Big end bearing let go. (Taken from my facebook page)...
I got mine from screens for bikes. Couldn't be happier, did cost me $115 delivered, but I think the road screens are a little more. [ATTACH]
Had this conversation with workmates recently. Decided it was unnecessary to change to a non o-ring as the power loss though friction once the...
Good lookin' tacho ;)
Anyone coming across the stream for this? I'll be there on the Fizzer and @Boydie77 with his GSXR 2fiddy both running in the Club challenge. Give...
Ended up ordering a FZR1000 one, should be fine..... All this talk of dashes and pulling mine out encouraged me to actually to a good job of the...
Bad photo, but I use a sticky foam pad. It's the same stuff I use for my seat pad but a smaller thickness. Any good foam or rubber shop should...
Just looked up the part number and the FZR1000 shares the same as the 3LN6\7 but th 1/3/5 use a different part. I wonder what the difference would be?