Separate names with a comma.
now I'm confused... All 4 stacks appear to be the same height. I swear the inner ones are supposed to be taller. There is only 1 in almost...
I do have an extra set. There are slight dings that may be hard to show but I can try and snap pictures if you want
I may have an extra set that came with the airbox. give me a day or two to get out to the garage and dig them up
They are not all the same :( 1st gen doesn't have the sexy trellis. That does make me wonder if an EFI motor would fit in the 1st gen. Would...
Howdy. Send pics! Always search local parts houses for part numbers before resorting to others. Shipping alone can turn a small purchase very...
In full ADHD mode today so haven't really gotten anything done, but I did have an "ahha" moment and pulled out the 1-2" mitutoyo mic and made an...
Suuuuuuuuuuuuuuuuuuuuuuuuuuuck, F thieves!
I'll go with Milleniums suggestion on materials for the sleeve. If MNG was going with plate the cases, it's likely because he has oversized...
Howdy! More pictures please!
I talked to Millennium Technologies (US company) about it, knowing the sleeves are cast in place. I stated my concerns (bore size, thermal...
Found OEM wrist pins finally! I didn't post about this when I found them so there wouldn't be a wrestle with someone else since they were on...
Started messing with cases/cranks again. I swear the 96 cases have white/brown/white/white/white crank bearings, but white isn't an option....
Spent hours working on a radial master cylinder transplant from a Zero, J.Juan 18mm -w- remote reservoir. One of the POs tried to adjust the...
and to keep the derp rolling, I was looking at MC17 schematic. At least some of the mc22 big end bearings are available (3 of 5), but looks like...
FML misread all the things. look like only 1 of the rod bearing sizes are available, 0 of the crank bearings. I thought xcite had sets...
Went parts hunting again. Could have swore 4/5 big end bearing sizes for the mc22 were available, but now it looks like 4/5 are NLA :( Here's...
Banshee motor would make things interesting
ZX4RR got woodcraft shorty sliders mounted yesterday. KLX115 got its oil leak fixed, petcock rebuilt, carb cleaned, tires aired up, and...
It's a few weeks out from happening (Graves hasn't been able to produce enough for retailers to have stock), but more than happy to give my...
Threw a paycheck at it, and haven't even started touching the suspension yet. I already know the forks will need love, only one option at the...
