Separate names with a comma.
I dont think anybody has said that. and it doesnt at 0 throttle because the needle is seated. You can idle lean (in fact a lot of bikes do it from...
oh ****, nice job!
lol you mean conrod, gsx doesnt have pushrods in it. id say wait for another gsx to come up and buy it and make a good one out of the 2. or you...
Sorry dude but thats garbage, ive had mine to 150 on a long flat road, i found it really hard to get it to run right on pods so i cut my airbox in...
Nice looking bike, i think it needs some Suzuki badges on the tank though
I've had good experiences using the vinegar method, just fill the tank with vinegar wait a couple of days drain 3/4 of it , put in a few sort...
for reference , my gsx reads about 13.2V at the battery when off and 14.6 when revved up, go buy the cheapest lead acid battery from supercheap...
if you cant find one, you can fill some regular pods with foam or cloth , it smooths the airflow a bit so the stock carbs are happy , it'll...
I've just done a full rewire of an 83 but the best thing is to lookup in a manual, for the coils one side (of each) gets 12v and the other is...
That part is the anti dive mechanism isnt it ? maybe the seals/?valves? in that are shot and the forks are putting pressure into the brake line...
2 things to do: pull the plugs but leave them connected to the coils , touch the threaded part of the plug to the body of the engine (only hold...
blue wire should be the neutral indicator the regulator should be (left to right) ground, AC1,AC2,AC3 Positive (the ground wire is slightly...
i made a little box above where the airbox was, that only goes down to the underside of the frame , and made a seat base up that had some extra...
Naaaaahhh keep it, join the angular tank club, they can be sexy too [IMG]
its the CV carbs , they have real trouble running without a smooth intake of air , with pods on they get a harmonic that pulls the rpm up , you...
sounds like good progress but your photos arent working(checked your photobucket profile and i cant see anything from the gsx250 file :/ ) , try...
looks awesome, im nearly in the same boat L's 2 months ago and a GSX250 that about 80% done. I'd love to see updates once you have the time to...