Separate names with a comma.
Congratulations on your new bike , best of luck with it. Post up some pics. Brembo rear master cylinder is stock, think Yamaha used to own Brembo...
If there is a notch in the steering then the bearing races will be damaged and need replacement. The lower race is tricky to remove, requires a...
It was registered with the engine number given as 1HX. A previous owner had registered it, (in Ireland).
If you have the part number you can order the parts from any Yamaha dealer.
my bike was like that too, no engine number stamped, only the 1HX prefix.
There are aftermarket fairings for the 3LN model on eBay. <!-- m --><a class="postlink"...
Hagon do a shock for it(£275). <!-- m --><a class="postlink"...
Wemoto have them, <!-- m --><a class="postlink" href="http://www.wemoto.co.uk">http://www.wemoto.co.uk</a><!-- m --> . Get the one listed for a...
Yep, that would be the way to go if you can figure out what lengths you'd need. I think that there should be some slack in them to prevent the...
Ended up not ordering them. I sent a message to the seller asking if they'd fit and he said no.
You can get the exact sizes in Pirelli sport demons, 100/80-17,130/70-17. The 100 means the tyre is 100mm width, the 80 is the height of the...
Found some cheap Goodridge hoses on eBay for an FZR400. I'm hoping they'll fit the 250 so I think I'll order them an try them. Delighted to find...
Looks like a 3LN1 m8. Don't know about the shift indiator.
Great info Yam4l0, must order in some of those. <!-- s:D --><img src="{SMILIES_PATH}/icon_biggrin.gif" alt=":D" title="Very Happy" /><!-- s:D -->...
What are the options for air filters? Are there any aftermarket that willl suit or do you have to go OEM?
Anyone know where to get hold of the flat washer-like rubber seals that seal the caliper halves? I've checked the parts list and they are not...
Manual is available from this site courtesy of dave: <!-- s:) --><img src="{SMILIES_PATH}/icon_smile.gif" alt=":)" title="Smile" /><!-- s:) -->...
Couple of questions on forks. What distance should a 3LN's forks be above the top yoke? FZR400 manual says 44mm, can't see a figure for it in the...
I think that's where mine are too, stuck in the ports! I didn't even know what they looked like before tonight but I've looked them up on Wemoto...
I'd say the gaskets are missing. I was wondering about this too. Do you need to order these from Yamaha? Would exhaust paste do? I think the...