Separate names with a comma.
thanks for the reply dave <!-- s:D --><img src="{SMILIES_PATH}/icon_biggrin.gif" alt=":D" title="Very Happy" /><!-- s:D --> ,i will give that a...
good day guys. i hope you can helps us,(off topic bike) <!-- s:offtopic: --><img src="{SMILIES_PATH}/icon_offtopic.gif" alt=":offtopic:"...
any final look for this awesome bike build! <!-- s:-| --><img src="{SMILIES_PATH}/icon_bike.gif" alt=":-|" title="Bike" /><!-- s:-| -->
hi guys tnx!! for the inputs,i will try your suggestions with regards to oil brands,as i've heard and read fizzzzers main problem is this...
guys tnxs for your opinion on my problem,these would be my last option for my bike to get it running,i hope it would last long and find a better...
hi guys: i have to push my topic up,it is almost a year now since my bike was damaged,my plan was to find a fresh engine with my...
hi dude i got the same problem as yours,i race one of my bike and suddenly destroyed the engine,upon dismantling the engine i found the...
tnx for the help guys,i would have to get this one with proper tools or with the help of others to pull this one off rather than damaging it,this...
good day guys(experts) i'm trying to remove the magneto of my 2kr bike,i did remove the cover,the nut in the middle...
dude...if still you have the problem,try to check the valve clearance,i have problem with same like yours(starting in full throttle and wait for...
dont'z i wish i could be near to that links that you gave,long way from home dude,i've learned a lot,tnx!!
tnx for the reply guys,i've learned a lot from you all,i have to learned more about these bikes a lot before doing anything more beyond their...
sorry for the late reply,that seems to hurt me a lot,i love my bike a lot,i didn't know i push it so hard,that would be a big problem if that...
hi guys!!it's been a while,i have problem w/ my 2kr bike,i always used my bike in red line,but my last trip was disaster,after a long hours of...
dude i have to agree with dave,i have encountered the same problem like yours with the same bike,more likely it is a valve clearance problem,check...
i only presumed that it is a faulty tacho because all three wires at the back of the tacho do all have connections or working,i have to better yet...
dave i made some initial check up,i get a 12volt bulb to test the wirings at the back of the tacho,the black one which is negative i suppose it...
guys i'm back!i've checked the valve clearance of my bike and the inlets were all out of clearance,then i took the long hour job,i replaced the...
back again!!i,ve done the thing's that you recomended except for one(checking valve clearance),the bike still the same and it got worst these...
hi guy's sorry for responding late, i have work to do and cannot connect that easy in the net, anyway dontz125 tnx for the response,my choke is...