Separate names with a comma.
Nah i wont be going, it'd be too tempting to bid and end up with another project MC22 CBR250RR with Tyga kit, $600, SA 50 plus people interested...
Auction in SA Lot's of older bike's, Honda 750, BMW 900, Maico, Kawasaki, OMZ ... https://www.facebook.com/marketplace/item/667980877236591...
[MEDIA]
How clean is your air filter ? When i fitted a bigger muffler onto my XT250 i needed to go down 1 jet size on the main as it was making the spark...
XT660R muffler's look similar to the SRX muffler too, an exhaust shop could modify it to work...
Yeah there's so many slip on muffler's out there, all shapes and size's There's a guy on ebay from SA that has a couple of muffler's that may...
Look's like the ABS colour is originally a light grey or white, i'd sand it back to that. Repair what you can with a soldering iron and abs Then...
Found another couple of tank epoxy sealer's Caswell do a tank sealer, one of the review's say's it's a lot better than the por15/kbs sealer's...
That suck's, any pic's of the damage ?
Spec's i found for them were 1.1 Ohm's to 1.5 Ohm's on the first page here. You won't notice any difference in spark if they are 1.5 Ohm primary each
Repco sell them, they' just standard car wheel weight's http://www.techtyreproducts.com.au/brochures/wheel-weights/index.html
Lams approved Ninja 650's 2009 Ninja 650L 650RL 2009-2011 Ninja 650RL ABS 2009-2011 2011 EX650F Ninja 2011-2016 Ninja 650L EX650K Ninja 2016 -2021
[ATTACH]
Yeah it should be fine doing that, just check on the can if there's any note's on recoating Once it's rubbed back with 600 wet and dry so it's...
What colour is the paint ? If it's a metallic then all you can do is to 2 pack clear coat it, or KBS Diamond finish, both are available in...
I bought new Darlington Transistor's from oversea's as no one had them locally, they were for my 3LN3 TCI though The 2KR TCI's are painfull to...
You can use COP'S with a higher primary resistance, up to 3 Ohm's (wired in series) or a touch more, They will draw less current through your TCI...
Did you see this one on ebay, if it's the same guy the stator cover is about 40km away from you ? Look's like he has quite a few part's for your...
@ruckusman, without going back through this thread i think Greg is using a basic 2KR TCI (Pre EXUP) ? I'm 95% sure the 2KR and 3LN Stator's...
Welcome to the forum, post up some pic's if you can Have you pulled the spark plug's out to check the condition ? If you find a rusty looking...