Separate names with a comma.
Put motul in when i did first oil change then castrol 4t semi synthetic when i did clutch. Gonna try something else soon Sent from my SM-G950F...
Next oil change i am going to try a different oil. Im not happy with how the clutch is behaving. Maybe different oil will help. At high rpm it...
I no longer have a centre stand as it would contact the ground when turning due to aftrermarket exhausts. I put it in 1st so it doesnt roll away...
So, its a nice sunny sunday here in perth and i have washed the car and gotten the bike out to inspect and clean the engine. Here are the before...
Theres no puddle... i will pull the plastics off this weekend and inspect how dirty it is and give it a bath and go from there i think Sent from...
My bike is a work commute, i do roughly 300km a week. It currently has 45,000km. I tend to be a little slack in measuring and checking often which...
Hi, i have a zzr250 and it tends to use heaps of oil. I am wondering if these are supposed to use oil and how much is an "ok" amount? It has no...
So... back to the clutch, i stripped it down and found the clutch springs werent long enough but everything else was to spec. I have just put it...
Dunno what was in it when i got it but wasnt doing all that good so did filter change and filled with motul and since this thing chews through the...
Yes i did. Sent from my SM-G950F using Tapatalk
Going off the manual the friction plates have to be between 2.92mm and 3.08mm and these are reading 3mm as is but again cant measure excact Sent...
Some of the time. Mostly during gear changes. Also suffers bad clutch drag Sent from my SM-G950F using Tapatalk
hi guys. i have been having issues with my clutch and have now pulled my clutch apart and possibly figured it out. now just need some confirmation...
Hi, i have a 06 zzr250 and have noticed sometimes when i change from 4th to 5th it wont grab 5th but doesnt remain in 4th and just free revs and i...
This is something i cant do. I dont know much about how they should be. Condition would be easy enough, chech for material thinkness and scoring....
Hi, i have recently started riding have a zzr250 with the same problem and i have to do this each time i start the bike. Are the clutch plates...