Separate names with a comma.
Ha, thanks! Yes the seal will be replaced. I think the bit that actually gets squashed and seals isn't cracked, but totally agree, time for a new...
Hi all, just a couple of questions about fuel cap sealing.... I filled up my RS very full, and ended up stopping after very little distance, put...
Joining in late to this conversation: My CB250rsA looks exactly like this, front bolt sticking up. I had thought someone had put the wrong bolts...
Hi guys, Looks like it's Dean Robinson who needs the help now. My cable routing was sorted (details above in case anyone else is trying to get...
Just looked back, from the same wemote site: DID standard grade, "pin length 17.50mm" DID VX3 X-ring "Pin Length 18.70 mm" - the one I got. I...
I ended up buying a DID 520 VX3 X-ring chain, and I think it's OK. The X-ring is slightly narrower than an O-ring. On my normal purchasing site...
Yep, the front will be where it could be tight on the frame. I've had a look, and think it is probably OK, but can't quite decide. Hard to get a...
Thanks all. I was sure a split link was fine, but the manual was particularly oddly strict on this. Anyone tried an o-ring chain on the cb250rs?...
Adding an extra question - are people happy running a chain with a split link on this size of bike (which I think is OK....) or would you always...
Since this thread is on topic, boosting it up with an extra question: anyone used an o-ring or x-ring chaing on the cb250rs? I saw it claimed...
In case anyone else stumbles across this, a couple of notes / tips: I decided to buy another bearing set that came with seals, from Pyramid parts....
Hi all, quick bit of advice if possible:- I am about to replace the steering head bearings on my CB250rs, and the yokes as the top nut thread...
So, answer is, a modern XL/XR250 kick does not fit a CB250rs..... [ATTACH] Original is in the middle, the easily available XR/XL one is on the...
CB250rs kick start options So, the CB250rs kick start part number 28300428871 is claimed to only be used on the 250rs...
Thanks again for the tips. Some solution details in case anyone else looks at this thread later: Throttle cables (I'll come to kick starter in...
Thanks for the tips Fred and others. I think your blog is going to be very valuable to me! Although I'm hoping not to do too much on this bike...
Thanks again for the replies. I think I tried the throttle cables behind the right fork leg to give more slack, but then on full left lock the...
Thanks for the replies. The owners manual doesn't have routing, and neither does the haynes manual, but perhaps the shop manual does, I'll take a...
Hi All, recently picked up a CB250rs (only 8000 miles on the clock) and have been working through minor issues with the bike (it had been stored...