Separate names with a comma.
Hi friends. According to the workshop manual, the coils must have the following resistances: Primary: 2.3 - 3.22 ohms Secondary: 12 - 18K omhs...
Hi friends. I need help please... 1HX Engine (3LN1) Assemble the engine, original rings, original gasket, valve seat and valve regulation are...
fzr250r 3ln1 fuel level float height
FZ250 1HX 1985 Silky white Y1 - 901 Fine Red Y2 - 212 Stripe colour- Black Y9 - 105 [ATTACH] FZ250 1HX 1985 Silky White Y1 -...
Kia Ora everyone! I'm a new member here and need some help. So I've got a 2KR fizzer for a project bike. When I first got it it was pretty bad...
While browsing the web i found some FZR250R info and have put it through a translator program. In 1990, is the type FZR250R. [ATTACH]...
So i've now fitted my aftermarket Fork Preload adjuster's to my FZR250 3LN3 These replace the standard fork top bolt's/cap's and give's you 17mm...
Just put a keyster kit through the carbs on my 89 3LN1, including new float needles, jets, emulsion tubes, needles. Not sure why but the seemingly...