Hi all, I am getting my MC22 tank painted and am hoping someone has a PB-184 tank that they can take some measurements of the stripes so I can get painter to recreate it Measure the thickness of the red stripe Measure the outer edge of tank cap to top of red stripe - both sides Measure the outer edge of tank cap to bottom of red stripe - both sides If you have a protractor, measure the angle of the silver line against the red stripe in degrees. Measure the edge of tank cap to the edge of silver\red Honda Measure the back of the tap cap to the top of the red stripe Measure the back of the tap cap to the bottom of the red stripe Measure the length of the silver stripe across the back on the tank down to the mounting bolt Maybe a pic of 2 of where the silver paint meets where the seat overlaps Maybe a pic of 2 of where the red stripe curls around I just need as much as I can to recreate the tank paint scheme, or even better if someone has one in Brisbane, allow me to bring a tape and make my own measurements. Thanks Chris
Hi Chris, I saw this same question answered on one of the Facebook CBR250 forums. Hopefully that was you and you got the dimensions you need. I tried to find it as I need the dimensions too but it seems to have gone. If you have them can you post them here please? Cheers, Paul.