Hello friends. I have a 1HX FZR 250 3LN1 engine, and I would like to know the diameter of the pistons and their use limit, the same with the rings and cylinder. I have a manual in Japanese but I can't translate it. Thanks a lot!
Bore48.000-48.005 mm Piston-to-cylinder clearance0.040-0.060 mm Diameter 47.945-47.960 mm Measuring point (from piston skirt bottom) 5.0 mm Piston pin bore inside diamete r14.002-14.013 mm Piston pin bore inside diameter limit 14.043 mm Piston pin outside diameter 13.991-14.000 mm Piston pin outside diameter limit 13.975 mm Top ring End gap (installed)0.15-0.30 mm Ring side clearance0.030-0.070 mm 2nd ring End gap (installed)0.30-0.45 mm Ring side clearance0.020-0.060 mm Oil ring End gap (installed)0.20-0.70 mm