Hey guys so I'm doing an oil change and a coolant change on my 93 fzr today. Can someone send me a link that shows how to change/flush the coolant out please. I don't want to stuff it up
Remove the tank and sidecover where the overflow bottle is, and fairings Undo the main hose that goes to the water pump at the bottom (lowest point) .... take the rad cap off Take out the 2 drain plugs at the front of the block run the hose thru it to flush ..... put everything back together ..... fill with water and run the motor for a short time .... let it cool before removing the cap .... do the same again , remove bottom hose and engine drain plugs , flush with hose again ..... then close everything up again and fill with new coolant ..... run the motor , then after its cooled some , take off cap and check level Also take off the overflow bottle and clean it out before adding new coolant to the correct level.