Hi All, Thanks for the add.I hope to be a part of discussions both ways as have been biking/fixing for many years. I am rebuilding a TZR250 2MA and am looking for a downloadable workshop manual if anyone can help. So far - panels and tanks stripped , repaired and painted with original looking decals.The engine top end has been rebuilt with new pistons, ring and re-bore, plus blasted and lubed power valves and ultrasonic cleaned carbs. Engine is in and forks back on with new taper rollers. Polished yokes, bars and footrests along with front mudguard brace. I am struggling with routing cables, petrol lines and wiring as I did not strip it in the first place.Any photos or explanation of where all the spaghetti goes under the tank would be of great help. I have a TY250 Majesty, which I am restoring to its former glory too and an XR250 so a few little quarter litre bikes. Regular ride is a Triumph Trophy though.
Resources here for the TZR ... requires Premium Membership https://www.2fiftycc.com/index.php?resources/categories/tzr250.51/ https://www.2fiftycc.com/index.php?account/upgrades