Hi All, Having a major clear out of my garage (15 years worth of spares), As i'm leaving the 2 stroke world behind. To save you from multiple posts I've listed everything in this one single post: 1* Standard Spare barrels – No powervalves, No pistons, Would ideally use a rebore but you may get away with just a hone. (1KT) 1* Standard Spare barrels – No powervalves, No pistons. -THESE BARRELS HAVE DAMAGE TO THE BORES AND THE SEALING FACE. – THESE WILL NEED REPAIRING AND A REBORE BEFORE USE. (1KT) 1* Standard gearbox, been stored for a long time (as I don’t use) – would have to check gearing I believe came from a 2ma. 1* Flywheel and stator (1KT/2MA) Many Pistons, various different sizes decoked with rings, Usually only done about 6months running. – Usually Mitaka or Gen Yamaha, more details upon request. (1KT) 0.5 oversize New pistons, Mitaka with rings (1KT) 1* Bored & Flowed Race carbs 31.5mm (Based on TM28SS) 1* Bellmouths Set for the TZR 250 Bored & Flowed 31.5mm carbs, with the air jet modification done as mentioned in the F3 KIT manual. – Also with these I used to use an Item called a powercomander, which was basically like an adjustable jet – The needles mentioned in the F3 KIT manual are also included in this kit. ( BASED ON 1KT/2MA MODEL) 1* Slightly bored carb I believe these are about 29.5. (Based on TM28SS) 1* Standard set of carbs (providing I can find the face's) (1KT/2MA MODEL) 1* Set standard 2XT carbs 1* TZR 250 Powervalve Control box (1KT/2MA MODEL) 1* TZR 250 CDI (1KT/2MA MODEL) 2* TDR 250 CDI’s 1* Mild Wide profile Tuned Engine – Without Electronics Willing to split for the right price. (Stan Stevens) 1* Top End Tuned Engine – Without Electronics Willing to split for the right price. (Graham File) Cases have been modified for use in a hovercraft so will be useless to you guys! Thanks for reading! David
Hi All, The following parts have now been sold: 1* Bored & Flowed Race carbs 31.5mm (Based on TM28SS) 1* Bellmouths Set for the TZR 250 Bored & Flowed 31.5mm carbs, with the air jet modification done as mentioned in the F3 KIT manual. – Also with these I used to use an Item called a powercomander, which was basically like an adjustable jet – The needles mentioned in the F3 KIT manual are also included in this kit. ( BASED ON 1KT/2MA MODEL) 1* Standard set of carbs (providing I can find the face's) (1KT/2MA MODEL) 1* Set standard 2XT carbs 1* Mild Wide profile Tuned Engine – Sold All apart from crankshaft Thanks David
