Hi, does anyone know what is the function for this PINK cable from IC Igniter to Speedo/Indicator connectors?
Speed limiter circuit. When the speedo needle wipes over 180km/h the signal changes and it messes with your ignition advance to slow down/prevent further acceleration. You can wire in a 10k ohm resistor (from memory) to prevent it. Some ZXR250's (like mine) come with a 240km/h speedo and no speed limiter, these models were made in Malaysia. Most will have the 180km/h speedo
So theoretically, I can check my IC Igniter Pink cable to ground if it has 10K resistance means the CDI have no speed limiter?