Pulled the carbs off today, someones made a decent mess of em last time they were apart it seems. missing a heap of screws, mangled most of the ones that are there. Looks like somethings been stuck into no.1s butterfly and they've bent it :/. Guess I'm looking for a new set to rebuild.
They are JIS screws ... which people dont know about and mangle them by using a Philips driver https://2fiftycc.com/index.php?threads/dimples-using-the-right-screwdriver.1068/
Yep Just bought another set of carbs. Will start a build thread once all my new bits and pieces arrive
posidrive/pozidrive screwdrivers are a good usable fit also - and you can usually get the handles with the replaceable bits with posidrive bits
Is there an issue/admin approval with creating threads in the Projects section? Tried to start a build thread but it doesn't seem to want to go through.
No don't think so, did you hit post reply ? And do you have a title for the thread ? Should still be there too, just hit the post new thread button in the relevant section again
Yep everything's there. Tried it about 10 times. Does the loading thing then stops and leaves it on the thread creation page :/
@kiffsta, sometime's when creating a thread, my PC does a similar thing. But if i open another tab in my browser and come on here the thread has loaded. When i go back to the original tab it'll still look like it's loading though. I normally just shut down the original tab once the thread has come up on the other tab
as Long as you are authenticated and logged in, there should be no reason why a new thread can’t be started are you using a windows pc ? If so click on the run box and type psr then press enter, click on start recording then try posting a new thread , at the end his hit stop and save the output zip file and send it to me
I reckon I've figured out what was happening. It was attaching my imgur embeds as files and didn't seem to like something about it. I posted a blank thread, copypasted my stuff, saw it was attaching the pics and deleted the attachments.