Hello, new member here and in the US with my next project, an '87 RG250 with some electrical issues that's been sitting for some time. It's a Canadian model and I am told by previous owner it needs CDI and Power Valve electrical system. The only thing I have found after years of searching on and off on the usual sites is Zeeltronic units. They seem reasonable enough and Borat has been helpful over email but has no settings for the '87 although he says he has the parts necessary to fix. Any thoughts? I am unfamiliar with electronic power valve actuators coming from a motocross background where they were mostly mechanical on the two strokers. Any suggestions?
You may have some luck on the Japanese auctions for those parts , do You have the cdi and power valve controller ? If so, checking the part numbers would be great in identifying the correct one from japan Zeeltronic kit is good, but a bit dear https://www.jauce.com/search/Rg250+cdi
Welcome to the forum Do you have the old cdi still ? Does it look like any pf these below? It's listed to fit these model's; RG250 1986 (G) (E01 E15 E21 E25 E34) RG250 1987 (H) (E01 E04 E21) RG250C 1987 (H) (E01 E02 E04 E15 E16 E21 E22 E25 E39 E53) RG250F 1986 (G) (E02 E16 E24 E30) RG250F 1987 (H) (E01 E02 E15 E24 E30 E34) RG250FC 1987 (H) (E01 E02 E06 E15 E16 E22 E24 E25 E30 E34) https://www.cmsnl.com/suzuki-rg250-1987-h-e01-e04-e21_model14000/cdi-unit_3290040a00/#.XOHew9QzZ9M Their picture look's like they used one of a rectifier though, can happen There are a few listed for sale https://www.ebay.co.uk/itm/32900-40...264340&hash=item4d70eb47a1:g:GGMAAOSwcHRcZTwQ https://www.ebay.co.uk/itm/Suzuki-R...446884?hash=item23b8cf45a4:g:Hv4AAOSwfYBclDCA https://www.ebay.co.uk/itm/SUZUKI-R...103041?hash=item3fb4f82d41:g:8JcAAOSw87lcG3ld