Hi Everyone, I have just joined this forum as I am building up a Bandit 250 for my nephew and I will probably be looking for info/workshop manuals etc over the coming months. I am not new to the Bandit scene as I have two 96 Bandit 1200's of my own but I am new to the 250 scene. I have learned over the years, rather than try and go it alone it is good to listen to the people that have "been there, done that" as they normally have a wealth of knowledge.
You are lucky, I had a 250v Bandit, and through our contacts here and my TAFE teacher we were able to acquire the genuine service manual and service data, available in the resources section.
Thanks Frankster, great looking bike. The bandit I'm working on will be setup for my nephew as a Junior Dragbike. I will post some photos when it is ready for the Strip. Yeehaa
You'll have to bring your nephew and the junior dragbike down to Gunnedah and race the Team 2fiftycc guys. There's normally 3 or 4 JD-eligable bikes being raced at each meeting. https://2fiftycc.com/index.php?threads/drag-racing-gunnedah-nsw.2942/page-20#post-145829 By the way, the first thing I did when rebuilding the Bandit was to see what needed doing on the carbs and then getting bits from Litetek which @maelstrom can help with.