Hey risky thanks for the reply, using my photo as reference could you explain it to me im abit confused but i think i get what your saying. Sorry to ne a pain
black/white becomes green-next solder dob becomes black/white next is red and last is black.closest to bolt hole on right hand side. go from left side of bike when standing behind it facing forward.last colour on rhs is black.
happy to help a fellow rider.next time buy japanese as megelli,s have not a good name for reliability.
Hi risky ive done the wiring like you said and ive still got power to the bike after turning keyswitch to off position, all the key seems to do is shut off the accereries but the dash light stays on. Ive picked up a digital multmeter if it helps ive been reading up on how to use them and what for but i was wondering if anyone had a wiring diagram for the 2011 megelli 250r ? Ive had a look all over for tge black wire with the bolt hole but all i could find was a green one that comes from the coil ground right around to near the solanoid and im a little lost to wether it is ment to ground out on the frame or go to somthing. If anyone has a photo of 2 of what their megelli 250r wiring looks like with tank and seat off it would be much appreciated. Thanks
will look at another megelli i have tmr to see if any difference. the speedo mileage stays lit up when ignition off.