Hey guys. I have 3 different mufflers that work on most 250cc. They are direct bolt-on for the CBR250 MC22 (1990 to 1999), but there is an adaptor that, if welded on your bike's extractors, will allow any MC22 mufflers to be used on your bike. The mufflers come with a set of new bolts, the brace and a gasket. The carbon fibre ones come with a Yoshi sticker if you want (not installed on the muffler so it's up to you where you want to apply the sticker. And please keep in mind these are NOT Yoshimura mufflers). The measure and price for forum members are (all prices include GST): - Carbon fibre, standard. 100mm diameter, 420mm long. $120 pickup, or $130 posted - Carbon fibre, shortie, 100mm diameter, 300mm long. $130 pickup, or $140 posted - Aluminium, standard, 100mm diameter, 420mm long. $75 pickup, or $82 posted Pickup in Wattle Grove, NSW is recommended. Carbon 420: XT420CF mounted on a CBR250RR Carbon 300: Shortie mounted on a MC22: Shortie mounted on a Ninja ZXR250: Steel 420: Internally, the 420mm stainless steel version is identical to the 420mm carbon fibre piece and sounds the same. The differences are the outer shell only, where the carbon fibre version is aroub 1.1kg lighter. This is the free adaptor: Here is the conversion done by didjabringabeer on his MC19:
Gday, Im interested in 1 of your 420 steel mufflers to 2319. Could you give me a total price please. Could you also include a second clamp please.
Risky, would like that but just at the moment have mine in bits for major refurb which is why Im after a new muffler. Wont be long though to finish off and then would like to tag along.
Hey everyone. Just updated the link to the youtube videos, with better images and the new URL. Everything is being posted by Australia Post now. Had too many issues with Fastway and Couriers Please.
I understood that they bolt on, but you need to modify the extractor. If I got it right, the end of the extractor that goes inside the pipe is too wide and needs to be trimmed. I haven't done it myself, that's why I'm not so sure.
If I can get an OEM zxr pipe, I might be able to get them made. Anyone in Sydney would have one I can borrow for a few months?