Source New front and rear sprockets plus chain for Megelli r 2010

Hi team,
I want to buy new front and rear sprocket for my Megelli 250r 2010 does any one know of that is near compatible to replace original sprockets and where to source them thanks....

 

I believe @risky should be able to help you out

 

ebay global. 125 is same bike frame, brakes etc. are your sprockets worn out?to stop over revving go up one tooth on front cog. was sold here as the speed kit and some dealers charged 300 to supply and fit. crossfire has the zongshen motor so i assume the dealer can supply.i rang the newcastle dealer and still waiting on reply.

 

Thanks Risky yeah the front sprocket is worn

can you let me know how you go with the kit mate be good to replace with a mod thanks

 

Zaneizane I also have a parts bike here with 8000ks if u require anything else. I will be putting it on the forum today

 

those teeth look ok to me. when you put your finger between the teeth can you feel a ridge? with your chain does it flop sideways? if so both are worn out.chain pitch is 520 with 104 links. rear sprocket is 37 tooth.
.

 

agreed.just went and checked mine and there is a flat on the top of the teeth. standard gearing is 13 tooth front but go to a 14 tooth one. zongshen motors are also in chinese 'pit' bikes.

 

Sorry risky but silly question where Can I get a 14 tooth

 

type in zongshen front sprocket to ebay global and there is an afam kit for 43 pounds. i just ordered a 14 tooth front sprocket so if you are not in a hurry will tell what the quality is in about 14 days.zongshen has 2 internal spines. there is also jt sprockets from thestates but postage was dearer.

 

I know a Chinese bike dealer here in QLD and he would have the sprocket you want... i brought all my china bike stuff from him... he has a reasonable prices too.. let me know and i will call him.. or if you want to call him... 0414 990 717...

https://www.facebook.com/pages/Dragin-Bikes/352465194831440

 

coffs motor sports also has zongshen stuff----coffs harbour.

 

Thanks team for the info awesome once again! @ troy01 I am after some cosmetic parts will pm cheers mate.

 

Sent you some pictures mate cheers.

 

jt also has sprockets. the kit in england has a non o-ring chain in it. better to buy o- ring chain for durability. wrecker on fleebay has parts

 

Hi Risky do you have a link to these providers on the net? thanks mate...

 

ebay global- zongshen sprocket kit- as i said there are 2 spline types so check-also some yamaha sprockets fit. standard is 520 pitch chain which can be sourced locally.have ordered a 14 tooth check a gear ratio chart for your gearing 37 back ?front-can go up to 16 but consider that toooo steep.

 

megelli was sold in states as a bencche.zongshen motor is also in a bike called crossfire.

 

Awesome @ forum members awesome contribution of knowledge and resources. .