I need a fotos an the type of my carbs!!!i have a zeal 95 model!!I can only saw that the carbs are mikuni,i cant find the model!!and i need a photos or a diagram to found the air screw!thanks!!
If its the same as the FZR carbs, then it'll be hidden just under the centre barrel of each carb. I think someone posted pics of their carb's off the bike - might be worth checking the 'How-To' section.
The idle air screws are the four at the base of the float bowls that are facing towards you under the drain screws.
ok thanks for the help!now i need the numbers for the 2ziglers (fuel screw with the hole!!) at the bottom of the carbs and the time i must turn the air screw!! My problem is tha i have 80number zigler an i thing that the carb is downloading!?!? too much fuel!i have turn 2 and a half time the air screw is that right?? p.s sorry about my english!!
The screws should be 3 turns out as standard. Not a problem about the English. Just so you know, when referring to carbs that are using too much fuel, the expression is 'running rich'.
the ziglers are ok!!the previews are 90.If it getting difficult to start with the screw at 2,5 turns it maybe get worsed with more air.But i think that it needs more air to burn the fuel that getting down???or i must put a smaller zigler???75-70???what zigler are the factory zigler???Small-big??And what is for the small zigler??
I don't know???? I don't know! I don't know!!!!! Sorry!!! All this punctuation is making me nervours!!!! ?!
you and me both casso. but its good to see a bit of enthusiasm, isn't it. DAMN IT, I SAID ISN"T IT????!!!!!!!
This is where we need someone with the original Yamaha FZR250 parts manual. Anyone, anyone... Bueler, Bueler, Bueler... The stock jet needle sizes should be listed in that mythical parts book.