Separate names with a comma.
Been busy, fitted new chain, ultra sonic cleaned the carbs and set them up to factory spec and gave it a bit of a tune up and now running very...
Some photos I took at the weekend of the bikes condition after 40 years. Obviously cared for and has spent years in dry storage somewhere. On the...
Collecting this MK1 tomorrow. Not going to go mad with tuning stuff but will be upgrading the brakes, chambers and carbs. Will be keeping standard...
Reset my float heights today and the jetting is 200 main jets, 40 pilot jet and 80 power jet.
Looked at those and prices are over the top just for the main frame.
That looks a wild project
Certainly would but unfortunately they are financially out of my reach
My next project bike is going to be a two stroke powered looney. I was thinking of getting a aluminium frame from a 125 sport bike and fit a 250...
I would have to look in the carbs to find out as they were set up on a dyno by doubletake motorcycles. I will be taking the carbs off soon to...
The bike is done and dusted, an absolute hooligan, I never knew 45hp at the wheel could be so much fun and the speed at which it gets up the road...
The final dyno set up is going to happen, Double Take are fully booked up to the 2nd of August I found out today which was a bit of a pisser,...
Forgot to post up the dyno graphs so here they are. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Photos showing the before and after of the back of the carbs after fitting the airbox to carb rubbers made from samco type 60 to 51 hose couplers....
1st of June came and off to the Dyno we went and it went not as expected.Rode the bike 23 miles to the dyno with no issue using only 1/4 throttle...
This is it the last I am doing to it honest :D, I have bought a pair of new Mikuni TMX30mm carbs, To my surprise the bottom and mid range have...
See if this works [MEDIA]
The bike is making 152.2 bhp at the back wheel with 90ftlbs of torque. Dyno video is too large to upload.
The new high lift cams are in, they took forever and a day to arrive. Booked in for the dyno on the 26th or April. Will post up figures and print...
Bit of an update and a glutton for punishment, Heavy duty valve springs in and just waiting for high lift cams to arrive that have been made to...
On the Dyno 44.5bhp at the back wheel and a good aggressive power delivery. The wonky fairing in the video has been fixed, one of the support...