Separate names with a comma.
Didn't go as not well and other things more pressing.
Been there, done that and very thankful for them looking after me.:thumb_ups:
Engine mounted. The rear mounts bolted straight in but had to make a new front one. [ATTACH]
Got my barrel back from the reborer (finally) and gave it a hot soapy wash and wipe with oil. Fitted the engine back together and when I get some...
It rides along nice and the Pirelli MT-60 tyres handle the dirt better than I thought they would.
Out for dirt ride days with friends. [ATTACH]
Mason has sold the Tenere to a museum somewhere near Sydney. Sad to see it go after so much effort to restore it but was always a bitch to start.
Good to hear your ok, bike can be replaced.
Try these blokes http://jbmindustries.com/index.html
Was given this early 1975 CB250 frame and wheels for a job I did for a friend, and I have a CG250 engine here that needs a home so going to see...
Not much interest today. Two bikes and a dozen cars. [ATTACH]
My old XL has been getting slower and harder to start lately, and has picked up an (oil) drinking habit. I decided that while I had the tools out...
Looks like you need some of these or similar....
I have never had much sucess in internal cleaning of bike radiators and replacement is usually the best option. Try Aliexpress....
It is on again April 19 to 21/2024.
To do a compression test correctly you must check valve clearances are correct first, then either remove the carbs or hold the throttle and slides...
Only one place to get carb kits that fit correctly and work as planned, and that is LiteTek (one of our members)....
Congrats on saving another good bike. You will need to disassemble the carbs and give them a good clean (preferably in an ultrasonic bath) and...
I am going to save up and maybe do the May event. Bit steep having a $110 increase from last year, my pension has not gone up that much and add...
If they have been there a while, a hot air gun can soften the rubbers some but you may still need to have a lever (wood or metal) to get any...