Separate names with a comma.
The oil level must be 3/4 of the window. If there are traces of oil dripping or sweating..it only means that you overfilled the engine. Theres no...
To brad, I also suspected the head gasket before but when i drained the coolant..theres no trace of oil. I removed the spark plugs and theres no...
If it is the valve clearance...at least it will be hot (not hotter than the others). It will have combustion but lower compression but the...
During my inspection, noticed that the #3 cylinder (counting from left to right) is cold. I checked all the cyclinders and they are all hot...
Im am Ben Castillo. Manila, Philippines 25 yrs old. Im an aircraft mechanic, Lufthansa I owned my fzr250 1990 for abt 6 months now. My...
that hose ur talking abt is tapped at the neck of the radiator just below the cap. Inside the radiator...if the coolant will overflow bcoz of...
im using castrol activ for 4T. its specially designed for 4 strokes high rpm bikes. Im using 20W (for hot regions). 10w is for cold regions. its a...
mine too goes half for abt 10 min of riding. i suggest you ride it for atleast 15min, surely the temp gauge wil go 50%. usually your bum cheek...
hope this might help 1. check the fuse for the fan. check also the fuse leads if broken>replace (5amps) if it still serviceable> ckeck...
During my bike inspection, i noticed that my cylinder #1 (counting frm LHS) is moist with oil while the rest r dry. Its not dripping. i dont knw...
You dont have to take the tank off the bike. Just take the (front) nut and bolt off. and raise the tank a little. My solution for that is i make...
that happens to me. its a hard gunk. dirt from roads plus some oil that condensed. I cleaned the hard black gunk, inspected the front sprocket but...
thanks ppl. maybe im just being paranoid here. Im just making sure that all my bike parts are intact. luckily, highly experienced members of this...
I saw black plastic ball bearings in my garage where my i park my fzr. I dont know if those bearings actually came from my bike. These bearings r...
Isolate instrument lights first from ur check list. Hard starting? try to see the headlight..Any noticeable change regarding its light or too dim?...
I suppose that lil plastic ur talking abt is just nothing or kind of garbage managed to get inside ur tank. Clogging your reserve passage If that...
One question abt a blown head gasket Is it better to know if my bike has a blown head gasket by looking at the coolant resevoir? Since the...
My speedometer dosnt work. I have isolated the cable and the meter. both in good condition. Now, i have one thing left, I need to troubleshoot my...
That happens to me too. the prob eas the fan fuse broke and i ddnt realize it. so the fan wasnt working. and my temp gauge is not grounded (i...
Sori, iddnt know that will be the outcome of the figure. just take a look inside your tank. one tube is higher than the other, thats for the...