Separate names with a comma.
Bike now sold.
Hi, Bought this bike a few years ago, with the intention of getting it running and back on the road. 99% complete bike, engine turns but does not...
Ok, received the diaphragms from "NRP Motorcycle & Carburettors". However, they didn't send any "hints and tips" on removing the old ones and...
I'll place an advance order of 8 at an "affordable" price:)!!!!!!
Felipe, i ordered one online from their site. i have sent an enquiry about them from their homepage contact site, but have yet to receive a...
Well, i have made the sacrifice !!!!!! I have ordered a loose diaphragm from NRP today. Bloody expensive. :mad: I only ordered one, so this...
Yep. I may have to make the sacrifice for the team....
Ahhhh, no. It is on tight, and there doesn't seem to be any elasticity when i pull on it. I didn't want to pull too hard in case i rip the...
Yep, something like that.. [ATTACH] [ATTACH] It's the top part that worries me.. That orange plastic thing doesnt have a break in it at all.....
So, pull out the rubber diaphragm from the shaft? What about the plastic (orange-ish) ring? The one in your picture looks like it has a break in...
Had a look on this site. Seems they have diaphragms, but they are loose. They do not come with the slide. Is this hard to pull apart, to take...
Thanks. Do you mean the link for the Hyosung Diaphram that Mr Grey linked to? Part number 13338HG5100 ?
@maelstrom , I actually read it on the Japanese manual i have. The manual is in Japanese, and it is for the first of the FZR250 series. Chapter...
Really? What model carb do i have then? I have the Japanese manual for the bike, written in Japanese, and on it, it has a code "4DV1", but...
Ha ha. That's exactly the site i went to when i saw that they use the same carb. Yes, they are expensive, but are they the same part? Because...
I have done some quick research, and found that the Hyosung GT250 uses the same carb (Mikuni BDS 26), and the part number for the Diaphram for...
Thanks for the good news:headbang: (But, i have taken it out, and the inside is all in tact, no cracks, no breaks. So, they still will seal,...
Ok, that's great. Thanks. :thumb_ups: So, i do need to repair them? They are no good like this? But what type of Sikaflex do you recommend?...
Is this Diaphram still good? On the top around the ring, they are cracked, and on one spot (circled), you can see through the crack in the rubber...
Ok guys, an update on the diaphram cover screws. I used a Dremel to cut a straight line across the screw head. Sprayed inox on them, waited about...