Separate names with a comma.
Hey @Joker, I am also after the choke bracket but for a 3LN3, any chance you have one? Also do you still have fairings for 3LN3, I could use some...
Correct, however also swapped over the o-ring and washer on cyl 4 mixture screw. They were in the incorrect order. I have diagnosed the original...
Thanks @GreyImport, got it running! My process so far was: 1) change pilot merge chamber bung o-ring; put back together and no change 2) new...
@ruckusman yep I’ve had the spark plugs out several times, and they have been replaced in this process. Spark is strong in them, I found a loose...
I’m having almost exactly the same problem with a 3LN3, however mine won’t start at all without fuel down the carbs. I’ve rebuilt carbs with...
Checked fuel heights, all good. Found one pin on the coils slightly loose, tightened up and went to start, still not starting. Bike started...
No luck with the rebuild kits, bike still isn't starting. Set fuel mixture screws to 1.75 turns out. Will try some more tinkering through the...
Mine were all different! See attached... Does anyone know where the jet air bleed is? Can’t find it, but my kit has a new one.
I have bought rebuild kits, so will be able to do everything I think. @GreyImport i cleaned and blew out with compressed air. Could it be blocked...
Hey!! If anyone still interested (@maelstrom ) I’ve changed the pilot merge chamber o-rings and no success. Good news is now the problem is...
Sweet good to know! Thanks @Grasshopper :)
Great, good to know I’m not alone. I agree, sometimes it seems avoidable by keeping the rev’s high, and never does it when riding ‘hard’. I only...
It’s having the problem that was exactly the same as @ruckusman , best described here in this thread (screenshot attached). Have checked fuel...
Yes @GreyImport, that’s the bike. I’m happy to try the 4 bung o-rings, will let ya’ll know how I get on
Sure thing, @ruckusman I am in Redfern, would be keen to pull apart some carbs together if you are keen and doing it soon! I have a track day...
Great, @ruckusman so just to confirm, I need put to put the jets as follows: Carbs 1 & 4: #100 Carbs 2 & 3: #97.5 Will let you know how I go. Do...
Hey @my67xr, are these the diaphragms for the fzr250 3ln3? Not sure if they change with 2kr vs 3ln etc etc...
Hey @ruckusman, did you ever sort this problem? I am having the exact same thing. I've checked fuel filter, petcock, checked for spark and plugs...
Cool, so 4 of those kits and the litetek kit or is it one or the other? Litetek kit - do I need service kit A & B for the complete overhaul?...
Awesome. I might give that a go over the Christmas break. Is there a kit I can buy with everything I need, I don’t want to start to take it all...