Separate names with a comma.
Sold.
Item Name - Rjays Rear Paddock stand Item Description - Used, but in great condition. Not much can go wrong with these, really. Comes with both...
A little test I use: Pull the section of chain that's wrapped around the rear sprocket at the 3 o'clock position. A new chain will barely lift...
Disconnect the hoses off both ends of the radiator and reverse flush with garden hose. That'll get most of the gunk out. Then you can use the...
I bought it direct from the KBS website. Terrific customer service. Package got lost and KBS ended up sorting it out for me. They ended up sending...
Take the tank off and then take the tap off to drain. Give a slosh around with fuel or solvent to get rid off any bits. Are you sure it's dirt?...
Got the new brake pads on the bike after a whole lot of mucking around. The brake-pad-pin plug was seized nicely. Resorted to a big hammer, centre...
I've heard of the whole 'saturate method' with leather, however I don't know if I'd be willing to do that with a racing suit. Especially when...
Welcome! If you'd like, I can recommend you some good mechanics around Sydney
That reminds me. The aftermarket jet kit that came with my bike also came with instructions to clip the slide springs. Start with two coils and...
I think you can get away with just taking the fuel tank off to get to the caps off. I don't think doing this mod will affect the air/fuel ratio,...
Apparently it's a pretty common mod on bikes with CV carbs. I haven't done it myself but have always been tempted to. You can always seal the hole...
As mentioned, Solvol will do the trick. However, if you're after the bees knees to hand cleaners, then get some Wurth Hand cleaner....
I do as well. Just a disposable paper element type from any auto shop. Similarly styled to the ones you linked.