Separate names with a comma.
So I bought the plugs linked above and they fit and appear to be of good quality. I have wired them up and done a test fire of the plugs out of...
Welcome, I'm in Glenmore park also.
Was looking at these....
Just confirming the ba ford connector plugs are the correct ones for the 129700-5430 coils?
Thanks for the replies, I ended up using Loctite No.3 on the threads and I found some fibre washers at work to put on the bolts.
Thanks, it just says plain washer. I am concerned about fuel leaking through the bolt threads.
When installing the fuel tap I noticed the threaded hole in the tank is not a blind hole, do any of you gents use anything in particular to seal...
I think I'm going to go for a set of 129700-5430, I haven't ridden the bike yet but I think the stock ones will definitely give poor performance...
Thanks, I was checking spark on my zxr250 today and the stock coils seem very poor on spark output, I tested them as per the manual and they test...
which part number coil are these?
I'm thinking about making some gaskets to seal it up, I haven't seen a set of new inlet manifolds for $100. Interesting about the leaks around the...
So in my search for inlet manifold number 4 on the second hand market, I got offered a "good used" one for $120 on FB and then found a whole head...
Hey guys, Im looking for a rubber inlet manifold for cylinder number 4 to suit my zxr250 Edit, parts found.
I used an ultrasonic cleaning tank set a 60deg c with a mix of water and simple green, it came up almost like new.
Thanks guys, I'm looking for rubber inlet manifold number 4 if anyone can help?
More progress today, worked on fitting up the fairings, I have to say for a 30 year old bike that's probably been dropped more times than I want...
Yeah I got it sorted out today thanks, started the bike up and no more oil leak which is nice. I spent the afternoon rebuilding fuel tank locks...
If anyone a spare new oil pump O-ring or knows where I can get one in Australia I would be keen to buy one, I had one on order but have just be...
So its been a while but progress has continued, recently bought some new tyres for the old girl some nice Dunlops, I also bolted the old yellow...
The z900rs gets my eye every time I walk into the local dealer for spare parts, I seem to be there a lot lately.