Separate names with a comma.
Went to remove the offending coil and noticed the live feed wire had frayed on the mounting bolt, so I hope that the short was reducing the input...
Not plugs or carbs. If I switch the plug leads from that coil then the dead cylinder switches. The dead cylinder relates to one specific lead. I...
Now at the strip. Running ten second eighths but only on three cylinders. Looks like one of my brand new coils is buggered.
Found the white wire, unplugged the connector, plugged it back in. Problem solved. 18k with a straight through system sounds great in my garage
Thanks. The coils and leads are brand new (TD850, I think as it has the same part no's). So I must have a problem with the wiring. I will follow...
The middle cylinder are not running, anyone know the colour code of the low tension wires that supply that coil. I know I would be able to see it...
Just a different idea, as you said you don't yet have a rolling chassis.
I have seen a couple RC162 replicas with FZR250 motors. https://www.jl-exhausts.com/honda-rc162-quotreplicaquot-parts-558-c.asp
I have never used forced induction on my bikes, but LOTS of friends who also sprint/drag do. They say never use flat slides on forced induction as...
My Norton virus checker will not allow me to see their website. It is listed as a known dangerous website.
When finished they will be ridden either on the road or sprinting. I will still ride my 998S on the road and my 64 year old wife will ride her...
Love looking at other riders projects. I have the problem of starting the next one before finishing the last one. Projects on the go. 1. Dresda...
Who makes a race fairing for the FZR250?
Having the 1 1/4 SU's is a very good reason for using them. Talking to Justin Newell (He has just rebuilt Little David) the other day and he is...
A single 2" SU will give you the same area/Airflow as four 26mm carbs.
If you have available parking, cant you get an old van and use it as a garage.
You should follow him on facebook and read about his V10 viper bike, V twin built from a radial engine, v twin honda 100cc, V12 Kwaker, straight 5...
I believe Allen is an expert with a hacksaw and files, he cuts and welds two engines to make one.
https://www.facebook.com/photo.php?fbid=10212544893960528&set=a.1860389192659&type=3&theater Look up Allen Millyard on facebook
Does the fuel pump work?