Hey fellas, My neutral switch (both the light on the dash and the switch itself) is not working (wasnt when I bought it either). I have tried a 2nd switch (the bit that goes near the water pump), which didnt solve the problem ($40 down but the original looked damaged and had a broken wire anyway). The side stand switch does work, the bike will not start unless it is up. The wiring looks good. I have tested the diode and it appears to be working correctly, the relay I'm not so sure on, I can hear it click when I put 12v to it but when checking for continuity or voltage on the other 2 pins, I get nothing, not sure if im doing something wrong here or not. Could a weak ground cause the issue? I am assuming the neutral switch works off ground?
Never mind, it turned out that it was missing the little spring loaded rod bit that goes into the hole where the neutral indicator switch goes, got one today off a wreck, working perfectly fine now ;D
