Hi all busy trying to wire up the Acewell pod type 4X54W-XX to my CBX 250 Twister race bike. The original dash has a 16 pin plug going into it. This short harness has 2 different 9 pin plugs fitted on the opposite end that connects to the main harness. I seams that something is lost in translation from Portuguese to English PDF manual I have. Normally when you read wiring colours, black/ brown, it means the cable is black with a thin brown marker. The manual seams to be the opposite. The wiring diagram writing in the pdf is illegiable when zoomed in. Please does anyone here have a better wiring diagram?. Even better would be the configuration of either the 16 pin dash plug. eg pin 9 is red +ive from battery or for the 2 x 9 pin plugs on the main harness side that connect to this short dash harness. This will save a lot out time rather than having to strip the original dash apart and trace back to the 2 x 9 pin plugs from which I run the new dash harness. Many thanks