I own a 2001 zzr 250, rebuilt the motor 2000 kilometres ago and everything was running fine until last week. It turns but wont fire, so i put new plugs in and still no fire. And now there is no needle movement from the tacho. It has half a tank of fuel, all hoses etc were replaced at time of rebuild. Any advice would be great appreciated
Maybe one of the forum members could pop over and give you a hand. It is probably something simple. Ask Mr GreyImport or Murdo they are both in Tamworth. cheers Blair
to the community. Main fuse is #18 (30A) If u get stuck or need a hand let me know Ive got 4 bikes Im trying to get going so 1 more wont hurt Hey Mr Green .... she might be in Tamworth , England ..... so that means youre closer
Hi Sandra Welcome to the Forum, sorry to hear about your problem with zzr, not so sure about fuses as the engine is cranking over, I would check that you are getting spark, if yes then I would check fuel supply. Sadly I am too far away to assist but have no fear, GREY and Murdo are here, both residents of your fine town, would check with them.