Hey guys, I need a valve gasket for my 3ln3 and am wondering if the gasket from another model will fit.<!-- m --><a class="postlink" href="http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=390623054464">http://item.mobileweb.ebay.com/viewitem ... 0623054464</a><!-- m --> Does anybody know where I can get one for a reasonable price? I adjusted my valves and now oil is slowly leaking between the rubber. Can I fix this another way?
hey mate, have you thort about using silicone to gap fill it, its not a gasket, but it is decently heat proof and a lot cheaper then gaskets and it puts a good seal around it. Im a carpenter and ive used silicone on my bike, with sexy results.
I'm a chippy too, I was actually in merimbula in march for a holiday, nicest place. Thanks for the information, I'll try that for sure, anything free is worth a shot! I'll try it and post my results in the future
I might be a bit late on this but there are oil resistant silcone products available to make gaskets. Available at places auto parts suppliers like Repco or Bursons.
