Pinned So what have you done to your bike today?

Getting the CRM250AR ready for Killarney Enduro ride today. Things needing attention included incorrectly routed brake cables, speedo cable, a pin for the rear brake so the master cylinder is connected to the pedal, cleaning of sticky residue from frame stickers, a few lost bolts, nipping of various bolts, chain adjustment, bark busters and I'm sure more things tomorrow!

Both my 03 CR125s need work: One has blown crank seals and the other needs a transmission recondition. So looks like the CRM250 is coming off the bench!





Still runs on fuel that is god-knows how many years old. Anyone else going to Killarney?

 

Finally picked up my frame from the powder coaters.
Goddamn thing shines like a Christmas tree.

 

Spare MC22 did not want to turn over freely, or hold idle when it finally fired. Fuel was leaking out the bottom of the carbs somewhere, and the carby boots had seen better days. Changed battery and starter motor, and swapped the carbs for another spare set I had previously cleaned out. Eliminated the fuel and inlet leaks. Started first go and idles and revs nicely. Can now be advertised confidently as a runner for someone who wants a bike for spares, project or racing .

 

Managed to bin my kwaka 636 track bike on Saturday....guess I can repaint the fairings now (after I patch them up) and do a few other mods I have had in mind. The slush fund is gonna take a flogging...

 

The race bike is gone

 

Went for a ride on my fzr gave it a hammering, but no match for my mate cbr929 .

 

I cried at the ongoing cost of a restoration.

 

Lol thinking of going back to a wr again was fun and can do flat track enduro and supermoto until I can find a r3 campaign lol

 

Ran a tank through the cbr250rr yesterday, then got the race ysr250 to fire off. Today took the Honda 919 (Honda Hornet elsewhere in the world) and realized that spending too much time on the 250s has a negative effect on my riding style. I've become so course on the controls that I felt like it was my first time on a liter bike. I think I need to keep a healthy mix between the little bikes and the big bikes to get and keep my skills where I want them!

 

watched this vid and thought what a lucky rider

 

Changed the oil on the R6. Had the rear pads done in Sydney as they started to go metal on metal... disc is a little worse for wear. Also discovered that the steering bearing needs to be done, along with the clutch.

 

Day two of the R3 cup!
My mate Steven is a raving lunatic but damn. This racing thing is fun haha

Sent from my HTC_0PJA10 using Tapatalk

 

Sold some bikes, bought a gixxer

 

bought a zxr250A

 

Wow, that Gizzer looks real good.... what... picked up a good deal? Doesn't look that old...

 

its a 2005 with 10000 kms on the clock

 

Nice find!

 

give ya 600 so you double your money.!!!!