Separate names with a comma.
Mine is still a little noisy after doing the shims twice. I'd prefer it silent too. Doing the shims at home cost me 30$ for the vernier calipers...
6 weeks and no real progress on the FZR . Some small progress , it is sanded and ready for painting n polishing but I had to buy a truck so any...
[img] I like this , break up the yellow a bit as my bike is now. Cause I would prefer to stick to the yellow black theme it had. Paint job was...
I can say no I haven't dived into electrics yet . And no not hard to start. As it turns out the FZR is here to stay for longer than I thought so I...
so whats the point of the jet ?
I'll ask about the price of that repair , if it's cheap enough i might go that way . But so far I can buy the tap , drill and new bolt for under...
when I tested my compression , it was approx 90 90 90 80 , I've posted a link to a vid in another post of mine of how it ran when the comp. was...
choke as it turns out are the #37.5 , thanks to dontz informing me . so maybe I could lower mine so the bike doesn't rev quite so hard when the...
Yeah the bottle was vented when I used it. Saves messing around with a tank when testing. I got into some work on the bike , readjusting the valve...
Got sick of my "no revs after a minute of running" thread and felt like a change.. So here we are . What can I say ..Not happy . For 2 reasons ,...
name similarities I should be more observant , save me posting in 2 places <!-- s:) --><img src="{SMILIES_PATH}/icon_smile.gif" alt=":)"...
a little better , it will idle nicely when stopped , tacho's isnt working so i cant say exactly what revs , but it still needs alot to take off....
13m float heights for a test cause I can't find what it should be anywhere
Looking around I can only find the size (6mm head 9mm long ) starting at size #50 somewhere in aus would be great to get the 37.5's cheers Simon.
OK valves are done , sadly to turned out at lowest settings both sides , I did the math to make the 1.6 and 2.6 but both side when refitted read...
it's sure not fun when they are not running. After I do the carbs I'll let you know how I go.The engine is back together and in tolerances , I'm...
I have 2 sets of carbs here , they both have the N-8 one reads 625 (has the 5ct7 needle) other carb emul's read 638 (this set had 5ct9's and...
still trying to source a pump for less then the 150-250 quotes I have so far
[img] this is how it sits today <!-- s:) --><img src="{SMILIES_PATH}/icon_smile.gif" alt=":)" title="Smile" /><!-- s:) -->
[img] [img] Ok this is where I am at now after tonights effort [img] I can reuse a few shims but will need to find the rest . So far so good...