Separate names with a comma.
Hydrolocked cylinder. Been there, done that. Turn your fuel switch off every time you park it, or (better solution) get an electronic fuel switch...
Wow this topic has changed O_o But going with the flow of the thread, I'll admit I always keep the bike at midrange. I almost always shift at...
Over 110 is safe compression. 125+ is more ideal. If you have a lean setup it'll be more of a bitch to start when cold (like mine) but 5 minutes...
I *think* its a 6mm metric thread, if you want to go to a bolt bar and plug the hole. 6 or 8mm.. My advice: Dont get an allen key bolt for it,...
Makes me think its not the exup. Probably was the chain touching the slapper.
Heh I saw the same thing happen recently. Family member (really bad driver) hit another guy, and had to pay him. The other guy he hit didn't even...
If there was a box on the lever they may be some pressure buildup in the brakes' pistons. Just undo the brake fluid nipples (hehe) and see if the...
Holy cheesus i thought this thread got lost. I still dont have any fairing references, and now exams are neigh. Doh. I guess i could go thru...
Are you sure you adjusted the balance screw? I mean, it needs a screwdriver to manipulate, the idle mixture is just a dial that you can turn with...
I've learned that loose gravel is my worst enemy. I slow down a rediculiously huge amount when entering gravel (or if i see possible gravel on a...
Burbles are fine. Dont worry about them as long as the bike doesnt stall at a stop.
I have clear rear indicators with yellow bulbs. I think they look pretty cool, but I can't post any pics, sorry.
I got a Xena lock. It's feckin ace.
I asked for someone to post a lil tut on how to adjust floats.. I would but no pictures.. Therefore no (easy to follow) tut. =( Glad you figured...
Nope, it's on the outside of the floats. Have a look for a small hole in each carb, below the drain hole. There's a flat head screw in that hole....
Actually, if I'm able to request.. I'd like a photo of both faces.. That is, the painted side, and the non painted side. As flat-on as possible...
I could try the fairings.. But I only have 3ln fairings to go by. Unlees you can point me to some good 2kr fairing pictures..
*victory dance*
Eh.. ok then sure. But I'll keep doing my oil changes cold. I mean it's not like cold oil is that much thicker then slightly warm oil. It's still...
I also use bryce 3d and terragen for awesome yet insanely fast and easy backdrops. Before you say that 3ds MAX is an industry standard, let me...
