Separate names with a comma.
Thats a no to the fairings, I prefer it naked. It would look nice with some bikini fairings. And no the bike is not on ebay or bike sales, but is...
OLD FRONT [img] NEW FRONT [img] OLD LEFT HAND SIDE [img] NEW LEFT HAND SIDE [img] OLD RIGHT HAND SIDE [img] NEW LEFT HAND SIDE [img]
Nice!!! But one question, What is the bloke doing in the backround of the Bandit Photo?
Do a budget job on it. Some sort of tape (duct, speed, masking) over it. Keeps the dust out.
R6 engine width is around 296mm, I think a little wide for the fzr. The FZR400, from previous posts fits, but very snuggly. But I really dont...
I dont think polishing the frame with metal polish will work, due to the fact the frame painted. As for the rims, painting white would be easier....
Very Nice. As for the rattle, join http://www.gixxer.com and post.
That was the same as mine before the fairings took flight whilst crossing an overpass. Here is a link to one of my posts with my polished rims....
You can take the radiator guard off the front and fix a fan there.
Hey Jalakoo See if you can track down an english version of the workshop manual for the FZR250, Or translate the Japanese one. No one can seem...
It should hug your face so that you cant chew gum, and its hard to get you fingers inside the helmet so you cant pick your nose.
Check that your fuel lines from your tank are going into the right inlet in the fuel switch. (Reserve to reserve and fuel to fuel). In regards to...
There is a screw located on the bottom of each carbie bowl. They angle 45 degrees from the horizontal towards the ground. Next to each screw is...
Have you tried to restart it? The wreckers in Sydney rip you off big time. I rang a couple of sydney wreckers for my front mudguard and the...
Uhmmmmmmmmmmmmmmm your image did not work
3ln-1 has 35000km.
When switch the bike on, can you hear the fuel pump pumping? If so, does it sound like its pumping fuel. (The sound should drop). Drain the...
Too late youve bought it!!! <!-- s:D --><img src="{SMILIES_PATH}/icon_biggrin.gif" alt=":D" title="Very Happy" /><!-- s:D -->
The idle screw is the big horizontal bolt that comes out between carb 2 & 3, just above the fuel hose that leads into the carbs.
All the paint was Australian Standard Acrylic, except exhaust which was heat proof paint in a spray can. The rims are the same paint. I stripped...
